Test your centrufuge for accuracy using the LW Scientific handheald digital tachometer. Be certain that
tou are spinning fluids ate the correct CLIA-recommended speeds. This unit is easy to use with results in only one second.
The tachometer will work on any centrifuge with a clear lid or port in the lid allowing the strobe light to reflect off of
the rotor.
Operating Instructions
- Cut 1/2 inch of reflective tap.
- Affix tape onto the top surface of the rotor below the view port or lid.
- Close the lid and turn the centrifuge on to a desired speed.
- Aim the Digital Tachometer through the view port towards the reflective tape.
- Press th ON/OFF button to check the speed.
- The RPM value will read directly on the digital display screen.
- Pressing the MEMORY button will recall the last registered speed.
If the Digital Tachometer does not indicate a speed:
- Double check that tape is affixed.
- Make sure the strobe light is aimed directly at the tape.
- Place a larger piece of reflective tape on the rotor
- Replace the batteries.
Speed Range: 20-40,000 rpm / Accuracy: +/- 20 rpm
Detection Time: 1 second / Detective Distance: 50-400 mm
Display: 5 digits / Working Temperature: 0-50 Degrees Celcius
Power: 4AA bateries (included) / Includes Carry case 35" of reflective tape
Warranty - One Year
Dimentions and Weight:
Height: 7.0" (180mm) - Width: 3.0" (78mm) - Depth: 1.5" (38mm)
Weight: 10.5 ounces (300 g)
(HH-TACH-T) Digital Tachometer. $189.00 
Click On Buy Me Button To Purchase
Price Includes United States Ground Shipping. These
items are normal factory stock. Items normally drop ship two to three business days from order placement. Ground
ship available only!
